THIS KIT WILL LAY YOUR TRUCK ON THE GROUND WITH 24 WHEELS. This Kit Has Everything! Plug and Play, All Wiring, Fuses, Hose, Fittings, Filters. Gauges To Monitor All Four Air Bag Pressure. Great Kit For Your C10 Or Custom Build Using an C10 Chassis. Valve Manifolds Use Less Fittings, Easier and Cleaner Install. Check Out In Stock Air Ride Kits or Message Us With Questions! Fits 2 Wheel Drive Models. Upgrades Available Message Us!! Airmaxxx Front Bolt On Air Bag Cups. Airmaxxx Rear Weld On Air Bag Mounts. Ekstensive Metal Works Rear Weld On 2-Link. (4) – airmaxxx 2600 air ride suspension bags. Airmaxxx 3/8 Valve Manifold. Airmaxxx 9ft Controller to Valve Harness. Airmaxxx 7 Switch Controller. Airmaxxx Chrome 480 Dual Air Compressors. 150 on – 180 off Pressure Switch. Airmaxxx 5 Gallon 7 Port Steel Air Tank. 50ft 3/8 DOT Air Hose. 20ft 1/4 DOT Air Hose (gauges). Nickle Plated Brass Camozzi PTC Fitting Kit. Airmaxxx 3/8 Water Traps. (2) 3/8 Element Filter. Air Hose Cutter &. (2) Dual Needle White Face Air Gauges. Rear 2-link Kit: The notch comes one piece and slips over the frame then welds on. It has the upper shock mounts already welded to the crossbars. After installing the notch cut the frame and the box in the bottoms with the filler pieces we provide and your truck is notched. Install the 2 link bars on your factory hangers and bolt them to the rear end with the u-bolt kit we provide. The bars already have the lower bag mounts and lower shock mounts already installed. The upper bags mounts are placed over the 2 link bag mounts then you weld it on and the bag mounts are done. Last thing is the pan hard bar. The notch already has the frame mount so you bolt it to the notch and weld on the axle mount and the suspension is ready for air bags.
