Our Most Popular 3/8 Complete Air Ride Management Kit. With Air Bags and Brackets Front/Rear. This Kit Has Everything! Plug and Play, All Wiring, Fuses, Hose, Fittings, Filters. Gauges To Monitor All Four Air Bag Pressure. Great Kit For Your 1988-98 Chevy/GMC 1500 2wd Truck. Valve Manifolds Use Less Fittings, Easier and Cleaner Install. Check Out In Stock Air Ride Kits or Message Us With Questions! Ekstensive Rear 2-Link Kit. It will fit 1/2 ton only. One piece of the notch slips over the frame and welds on, with the upper shock mounts pre-welded to the crossmember. Once installed, cut the frame and box with the filler pieces provided, and the truck is notched. Bolt the two link bars to the factory hangers, and then to the rear end with the u-bolt kit supplied. The lower bag mounts and shock mounts have already been installed on the bars, with a 2 block. To finish, the upper bag mounts are placed on a crossbar supplied, then welded. Lastly, the pan hard bar bolts to the notch frame mount and welds to the axle mount, and the suspension is air-bag-ready. Fits 2 Wheel Drive Models. 1988-98 Chevy 1500 Truck. (Requires Front Spring Pocket Trimming/Cutting). Airmaxxx Front Bolt On Air Bag Cups. Airmaxxx Rear Weld On Air Bag Mounts. Ekstensive Rear Weld on 2-Link & Notch Kit. (4) – airmaxxx 2600 air ride suspension bags. Airmaxxx 3/8 Valve Manifold. Airmaxxx 9ft Controller to Valve Harness. Airmaxxx 7 Switch Controller. Airmaxxx Black 480 Dual Air Compressors. 150 on – 180 off Pressure Switch. Airmaxxx 5 Gallon 7 Port Steel Air Tank. 50ft 3/8 DOT Air Hose. 20ft 1/4 DOT Air Hose (gauges). Nickle Plated Brass Camozzi PTC Fitting Kit. Airmaxxx 3/8 Water Traps. (2) 3/8 Element Filter. Air Hose Cutter &. (2) Dual Needle Black Face Air Gauges.