Adj. Damper Coilovers Set for Mitsubishi Lancer ES Sedan 4-Door 2008-2016 2.0L

Adj. Damper Coilovers Set for Mitsubishi Lancer ES Sedan 4-Door 2008-2016 2.0L
Adj. Damper Coilovers Set for Mitsubishi Lancer ES Sedan 4-Door 2008-2016 2.0L
Adj. Damper Coilovers Set for Mitsubishi Lancer ES Sedan 4-Door 2008-2016 2.0L
Adj. Damper Coilovers Set for Mitsubishi Lancer ES Sedan 4-Door 2008-2016 2.0L
Adj. Damper Coilovers Set for Mitsubishi Lancer ES Sedan 4-Door 2008-2016 2.0L
Adj. Damper Coilovers Set for Mitsubishi Lancer ES Sedan 4-Door 2008-2016 2.0L
Adj. Damper Coilovers Set for Mitsubishi Lancer ES Sedan 4-Door 2008-2016 2.0L
Adj. Damper Coilovers Set for Mitsubishi Lancer ES Sedan 4-Door 2008-2016 2.0L
Adj. Damper Coilovers Set for Mitsubishi Lancer ES Sedan 4-Door 2008-2016 2.0L
Adj. Damper Coilovers Set for Mitsubishi Lancer ES Sedan 4-Door 2008-2016 2.0L
Adj. Damper Coilovers Set for Mitsubishi Lancer ES Sedan 4-Door 2008-2016 2.0L
Adj. Damper Coilovers Set for Mitsubishi Lancer ES Sedan 4-Door 2008-2016 2.0L

Adj. Damper Coilovers Set for Mitsubishi Lancer ES Sedan 4-Door 2008-2016 2.0L
Top mounts: pillow ball top mount with camber plate front, standard rubber top mount rear. Damping: 24 levels rebound damping adjustable. Front Spring Rate: 9kg/mm (504 lbs/in). Rear Spring Rate: 6 kg/mm (336 in/lbs). Adjustable Height: Yes lowering 1″ to 3″. Shock type: Twin tube. Spring Preload: 7-10 mm. Product included: complete coilovers 2 front and 2 rear, a pair wrench for height adjustment. Gross weight: 23.8kg Package size: 635120cm. Lowered height adjustment from 1″ – 3″ which allow lower center of gravity and also add a more aggressive stance. Camber plate top mounts help to eliminate the need for a separate camber kit. Pillow ball top mount – It improves the steering feel and response. Rubber top mounts help to deliver a smooth and forgiving ride for city use at any speed and rubber joints assist in absorbing hard impacts. Twin-Tube structure allows sufficient stroke within the shock absorber. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation. Separate height adjustment does not affect damper stroke. Height can be adjusted with coilovers installed on the vehicle. High Tensile performance spring – STRESS TESTED OVER 600,000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability and performance. Height Adjustment tools included. A 24 rebound dampening adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions. No any proprietary rights, affiliate and sponsorship with the third party marks. Adjustable Damper & Height. 24-way adjustable damper force allows the user the ability to dial in your coilovers to any driving needs. Most components of the suspension parts are made from 6061-T6 aluminum to increase strength and rigidity. High Tensile Strength Spring. Tested under a 600,000 time continuous compression test, the spring distortion was less than 0.04%. Twin-Tube shock design is used for low internal frictional resistance and dust boot protects damper seal. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Steering & Suspension\Shocks, Struts & Assemblies”. The seller is “maxpeedingrods-ca” and is located in this country: US. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Canada, Australia, South Africa, Bahamas, Mexico, New Zealand, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Barbados, Bermuda, Bolivia, Ecuador, Egypt, French Guiana, Guadeloupe, Cayman Islands, Martinique, Nicaragua, Peru, Paraguay, Reunion, Uruguay, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands.
  • Adjustable: Yes
  • Brand: MaXpeedingrods
  • Camber Plates: Adjustable & pillow ball design
  • Chassis: CY2A/CZ4A
  • Color: Gold
  • Damper Adjustment: 24 Ways Adjustable Damper Force
  • Features: 100% Accuracy of Fit, Adjustable, Easy to Replace
  • Fitment Type: Direct Replacement
  • Front Spring Rate: 9kg/mm (504 lbs/in)
  • Interchange Part Number: for Mitsubishi Lancer & Ralliart 2008-2016
  • Items Included: Compressor, Mounting Hardware, Shock, Strut
  • Kit or Single Part: Kit
  • Kit Parts Included: Coil Spring, Shock, Strut
  • Manufacturer Part Number: UXQ34M
  • Manufacturer Warranty: 2 Years
  • Material: Aluminum, Carbon, Steel
  • Notice: This is aftermarket replcement part., California Prop 65 Warning., This is aftermarket replcement part
  • OE/OEM Part Number: For Mitsubishi Lancer & Ralliart (CY2A/CZ4A) 2008-2016
  • Other Part Number: excludes Lancer Evolution
  • Placement on Vehicle: Front, Left, Rear, Right
  • Product Type: Coilover Shock Absorber
  • Quantity: one set (2 pieces front + 2 pieces rear)
  • Rear Spring Rate: 6kg/mm  (336 lbs/in)
  • Shock Absorber System: Double Pipe
  • Shock Absorber Type: Oil
  • Superseded Part Number: 24 levels rebound damping adjustable
  • Type: Shock & Spring Assembly
  • Warranty: 2 Years
  • UPC: 6941689802513

Adj. Damper Coilovers Set for Mitsubishi Lancer ES Sedan 4-Door 2008-2016 2.0L

Comments are closed.

Proudly powered by WordPress
Theme: Esquire by Matthew Buchanan.